Wooden and metal surfaces need to be protected from rusting or damages because of harsh weather. Painting them not only protects the surfaces underneath from rusting but also increases the aesthetic appeal. Our professional painters at PaintMyNest know the best thing for your doors or grills. We know whether to use Red Oxide or Yellow Primer or Wooden primer depending upon the surface requirement and also help you decide which paint type and colour shade to choose to increase the aesthetic appeal.

Process Of Single Coat

1. Surface preparation

Sanding of the surface is done to remove dust and dirt from the surface.

2. Paint Application

Single coat of paint is applied to give a fresh look to the surface. Same paint type and colour shade will be applied which are present on the surface.

Process Of Double Coat

1. Surface preparation

Sanding of the surface is done to remove dust and dirt from the surface.

2. Putty Touchup

Putty is used to fill some holes or cracks only on wooden surfaces, on metal surface putty touchup can't be done.

3. Paint Application

Two coats of paint is applied to give a fresh look to the surface. We can even go with a different paint type or colour shade than the existing one.

Process Of Fresh Paint

1. Surface preparation

Sanding of the surface is done to remove dust and dirt from the surface.

3. Primer Application

We use Wood primer on the wooden surface and red oxide on the metal surface. Wood primer helps in strong binding between wood and paint. And red oxide helps in protecting metal surfaces from corrosion.

3. Paint Application

Two coats of paint is applied to give a fresh look to the surface. We can even go with a different paint type or colour shade than the existing one.