Exterior House Painting Services Near Me | Exterior Painting in Pune, Pimpri Chinchwad

Repaint
Fresh Paint

Process Of Repaint

1. Surface preparation

First surface is cleaned using a wire brush to remove the loose particles, dust and dirt and algae from the surface.

2. Putty Touchup

Putty touchup to repair and fill the damages i.e putty is only applied in the damaged area to make it smooth and at the same level as the rest of the wall.

3. Primer Application

Primer has binding and hiding properties, it helps in adhesion due to binding properties and its hiding properties are helpful while changing the colour shade from one colour to another colour.

4. Paint Application

Paints produce that final finish and colour to the surface. Before deciding on the product, end requirements in terms of functionality and appearance must be considered. Minimum of 2 coats will be applied to achieve a durable, consistent layer. Very dark colours may require an additional coat also. The surface needs to dry naturally after every coat. Water-based paints, dry fast (max in 3-4 hours).

5. Post Service Cleanup

Post cleaning includes removing paint marks which may have been caused during the painting work. We always ensure proper cleaning is done, And make your place clean.

Process Of Fresh Paint

1. Surface preparation

First surface is cleaned using a wire brush to remove the loose particles, dust and dirt and algae from the surface.

2. Putty Base

We do two coats of putty on the entire wall, it provides a smooth finish. Putty base is only done on the exterior wall when the plaster of the wall is smooth plaster, in case of rough textured plaster putty base can't be done.

3. Primer application

Primer has binding and hiding properties, it helps in adhesion due to binding properties and its hiding properties are helpful while changing the colour shade from one colour to another colour.

4. Paint Application

5. Post Service Cleanup

Post cleaning includes removing paint marks which may have been caused during the painting work. We always ensure proper cleaning is done, And make your place clean.

Process Of Fresh Paint

1. Masking and Packaging

Before Initiating painting, we ensure that all your valuable goods (sofa, beds, TVs, Refrigerator, etc.) are protected by packaging and masking. Packaging and masking ensures that furniture is not damaged and lesser cleaning is required at the end.

2. Sanding

Sanding removes unwanted dirt and loose particles from the wall. By using the Vacuum Sanding machine, we ensure the wall is evenly smooth and also reduces dust particles by 70%.

3. Putty Base

We do two coats of putty on the entire wall, it provides a smooth finish. Whenever we want a silky smooth finish for example in the case of Luxury Emulsions, a putty base is a must.

4. Primer Application

Primer has binding and hiding properties, it helps in adhesion due to binding properties as we have applied putty on the entire wall and putty doesn�t have binders in it so primer is a must.

5. Paint Application

Paints produce that final finish and colour to the surface. Before deciding on the product, end requirements in terms of functionality and appearance must be considered. Minimum of 2 coats will be applied to achieve a durable, consistent layer. Very dark colours may require an additional coat also. Ceiling to be painted first, and then the walls. The surface needs to dry naturally after every coat. Water-based paints like Emulsions that are used on walls and ceiling surfaces, dry fast (max in 3-4 hours).

6. Post Service Cleaning

Post cleaning includes removing paint marks which may have been caused during the painting work. We always ensure proper cleaning is done, And make your place clean.